Troubleshooting - Silvercrest SKAW 5.00 A1 User Manual And Service Information

7

Troubleshooting

Fault
The camcorder cannot
be switched on.
The camcorder suddenly
switches off.
The recorded image
was not saved.
The camcorder switches
off while a photo is be-
ing recorded with the
self-timer.
The image is out of fo-
cus.
It is not possible to use
the memory card.
None of the buttons
work.
Silvercrest SCAW 5.00 A1
Possible cause
The battery is not cor-
rectly inserted.
The battery is empty.
The Auto Power Off
function is activated.
The battery in the cam-
corder is empty.
The power supply failed
before the image was
saved.
The battery in the cam-
era is empty.
The motif was not in the
area of focus.
The memory card is
write-protected.
The memory card con-
tains non-DCF images
from other camcorders.
There was a short circuit
when the camera was
connected to another
device.
Solution
Insert the battery cor-
rectly.
Charge the battery.
Switch the device on
again.
Change the battery.
Replace the battery
immediately when the
battery LED lights up
red.
Change the battery.
Take a photo in the
available area of focus
and select either Normal
or Macro Mode.
Remove the write pro-
tection on the memory
card.
Format the memory
card. Save the data
elsewhere before you
format the memory card.
Remove the battery
from the camera and
replace it once more.
English
51