Whirlpool ARC1401 Health & Safety, Use & Care, Installation Manual And Online Warranty Registration Information page 30

ARC2101
Fig.A
Fig.D
Fig.F
1. Rubber cover
2. Screws
3. Decorative cover
4. Screws
5. Top hinge
1. Close the door and take out the rubber cover
decorative cover ③. (Fig.1)
2. Unscrew the screws ④ and take out the top hinge ⑤, then remove the door and put door aside
safety. (Fig. 2)
3. Pull out decorative nail ⑥from left top of cabinet. (Fig.3)
4. Unscrew the 3 screws ⑦ from the right bottom of cabinet and remove the lower hinge ⑧. (Fig.4)
5. Pull out cabinet leg ⑨ from the left bottom of the cabinet and fix it onto the right bottom of the
cabinet. (Fig.4)
6. Fix the lower hinge ⑧ onto the left bottom of the cabinet with screws ⑦. (Fig. 4)
7. Revolve the door 180 degrees, install the door onto the lower hinge ⑧, then close the door
carefully. (Fig.5)
8. Fix the top hinge ⑤ onto the left top of cabinet with screws ④, adjust door and install the
decorative cover ③ and the rubber cover
9. Block the 3 screw holes at the top right of the cabinet with the spare decorative
nail.
Fig.B
Fig.E
6. Decorative nail
7. Screws
8. Lower hinge
9. Cabinet leg
, unscrew the two screws ② and remove the
. (Fig.6)
27
Fig.C