Panasonic KX-HNC600C Installation Manual page 20

Setup
3
Attach the camera to the stand using the
stand attachment hole on the rear or
bottom of the camera, depending on the
direction you want to aim the camera.
R Loosen the screw (
R Insert the tip of the stand (A) into the
stand attachment hole (B) on the rear
or bottom side.
R Secure the camera by tightening the
screw ( ).
2
Attaching to the hole on the rear side
2
2
Attaching to the hole on the bottom
side
2
For assistance, visit www.panasonic.ca/english/support
20
HNC600C_(en_en)_0113_ver.201.pdf
).
1
1 1
1 1
2
20
4
Adjust the camera angle.
R Loosen the screw (
the camera to the desired angle.
R Tighten the screw (
the screw ( ) until the camera is
2
secure.
1 2
) and then adjust
1
) while holding
1
1
2017/01/13 11:54:14