PND_UG.fm Page 10 Thursday, August 14, 2008 1:00 PM
initial setup
Before you navigate with your TN20/TN30, you need
to perform the following initial setup steps:
1
Mount in your vehicle.
2
Apply power using car charger.
3
Turn on and configure initial settings.
All manuals and user guides at all-guides.com
To reset the TN20/TN30, press the Power button for 8
seconds, then press Power button again to turn on.
You can also use a pin to press the Reset button when
the TN20/TN30 is on.
power & charging
Your TN20/TN30 should be powered using the