Table of Contents
Advertisement
Compare the connection data on the data plate of the vacuum
cleaner (mains voltage and frequency) with that of the mains electri-
city supply. This data must match exactly. Without modifications, the
vacuum cleaner is suitable for 50 Hz or 60 Hz.
The mains electrical outlet must be fitted with an appropriate cir-
cuit breaker.
Temporary or permanent operation with a self-sufficient or non-
mains synchronous energy supply system (e.g. isolated networks,
back-up systems) is possible. A requirement for the operation is that
the energy supply system complies with all current local and national
requirements that apply to stand-alone, solar and/or battery sys-
tems.
The protective measures provided in the domestic installation and in
this Miele product must also be assured in their function and opera-
tion in isolated operation or in non-mains synchronous operation, or
replaced with equivalent measures in the installation.
Do not pull or carry the vacuum cleaner by the cable, and be care-
ful not to damage the cable when withdrawing the plug from the
socket. Keep the cable away from sharp edges and do not let it get
squashed, for example, under a door. Avoid running the vacuum
cleaner over the cable. This could damage the cable, plug or socket.
The appliance must not be used if any of these have suffered dam-
age.
Do not use the vacuum cleaner if the cable is damaged. If the
cable is damaged it must be replaced together with a complete
cable rewind. For safety reasons this must only be done by Miele
Service or a Miele authorised service technician.
Repairs should only be undertaken by a Miele authorised service
technician. Otherwise the warranty will be invalidated.
Repairs and other work by unqualified persons can cause consid-
erable danger to users.
Warning and Safety instructions
5
Advertisement
Table of Contents
