Dell P2722H Disassembly Procedure

1
DELL P2722H
1. Disassembly Procedures:
S1
Open the Pizza carton with a proper tool.
Take out all of the
cable, power cable, USB cable, CD&user's manual,
S2
stand and EEI label(optinal) from the carton from the
carton.(Note: It depends on whether users returning
the accessories)
DP cable
USB cable
user's manual
Take out of the Paper-top from the carton, then take
S3
out the packed monitor and packed stand from the
Pizza box.
monitor
Take out the monitor from the bag and put it on a
S4
protective cushion.
accessories including QSG,
base
QSG
power cable
stand
Use a Philips-head screwdriver to remove four
S5 screws for unlocking mechanisms.
(No.1~4 screw size=M4x10; Torque=12
DP
Wedge your fingers between the rear cover and the
middle bezel on the corners of the top side of the
monitor to release the rear cover, then use one hand
S6
to press the middle bezel, the other hand to pull up
carefully the rear cover in order of arrow preference
for unlocking mechanisms of rear cover.
2
Lift the rear cover up carefully. Disconnect the key
S6
cable and USB FFC cable from the connectors of
the interface board, and then remove the rear cover.
±
0.5kgfxcm)
2
3
1
4
.
1
2
3