Mitsubishi Electric Ecodan EHSC-VM6D-CN Installation Manual page 53

6
Service and Maintenance
Engineers Forms
Commissioning/Field settings record sheet
Main remote controller screen
Setting Service menu Energy
monitor
settings
External in-
put settings
Thermo ON output
*1 The lower limit is -15°C depending on the connected outdoor unit.
*2 The lower limit is -13°C depending on the connected outdoor unit.
*3 The lower limit is -14°C depending on the connected outdoor unit.
*4 On: the function is active; Off: the function is inactive.
*5 Do not change the setting since it is set according to the specification of flow sensor attached to the hydrobox.
*6 Valid only when operating in Heating room temperature.
*7 When DIP SW5-2 is set to OFF, the function is active.
*8 If asterisk (**) is chosen freeze stat function is deactivated. (i.e. primary water freeze risk)
Electric heater Booster heater 1
capacity
capacity
Booster heater 2
capacity
Analog output
Delivered energy adjustment
Water pump Pump 1
input
Electric energy meter
Heat meter
Demand control (IN4)
Outdoor thermostat (IN5)
Parameters
0 - 30kW
0 - 30kW
0 - 30kW
−50 - +50%
0 - 200W or ***(factory fitted pump)
0.1/1/10/100/1000 pulse/kWh
0.1/1/10/100/1000 pulse/kWh
Heat source OFF
Heater operation
Zone1
Field
Default setting Notes
setting
2kW
4kW
0kW
0%
***
1 pulse/kWh
1 pulse/kWh
Heat source
OFF
Heat source
OFF
Zone1
en
24