Advertisement
Quick Links
DELL SE2216H/SE2216HV/SE2216HM
1. Disassemble Procedures
S1
Turn off power
Unplug cables from monitor.
S2
Remove stand from monitor release button
(with Philip-head screwdriver)
S3
Use Philips-head screwdriver
remove 2 screws for unlocking.
M4 x 10, Torque = 12 +/- 1Kgf.cm
*For VGA connectivity, use hexgonal
screwdriver to remove 2 VGA screws. Torque
= 0.8 +/- 0.1Kgf.cm
S4
S5
(
S6
Φ5 mm) to
V
Dismantle mid frame and back cover (start with
top of monitor).
Flip the monitor to remove back cover
Remove acetate tape on top of backlight cable &
aluminium foil on top of LVDS cable.
Press the hook for both side to unplug LVDS cable.
Remove mylar on top of power board.
1
Advertisement
Related Manuals for Dell SE2216H
Summary of Contents for Dell SE2216H
- Page 1 DELL SE2216H/SE2216HV/SE2216HM 1. Disassemble Procedures Turn off power Dismantle mid frame and back cover (start with Unplug cables from monitor. top of monitor). Remove stand from monitor release button Flip the monitor to remove back cover (with Philip-head screwdriver) Remove acetate tape on top of backlight cable &...
- Page 2 DELL SE2216H/SE2216HV/SE2216HM Remove electrolyte capacitor >25mm height (red Use Philips-head screwdriver Φ5 mm) to mark) from printed circuit boards. remove PCBAs screws. Cut the glue between bulk cap and PCBA with knife M3 x 5 (5pcs for VGA connectivity) & M3 x 6 –...
- Page 3 DELL SE2216H/SE2216HV/SE2216HM 2. Product Material Information The following substances, preparation, or components should be disposed of or recovered separately from other WEEE in compliance with Article 4 of EU Council Directive 75/422/EEC. Capacitors / Condensers (containing PCB/PCT) Not used Mercury containing components...