Ydp-S55, Ydp-S35 Assembly - Yamaha ARIUS YDP-165 Owner's Manual

YDP-S55, YDP-S35 Assembly

You can watch a video of the assembly.
Scan the QR code at left or access the
website below.
https://4wrd.it/ydp_assembly_video2
Check if you have all of the items indicated below.
NOTICE
Make sure to place the main unit on the polystyrene foam
pads that have been removed from the packages. Position the
pads so that they will not contact the connector panel on the
bottom of the main unit.
Main unit
Polystyrene foam pads
Connector panel
Cord holder
Back board
Side
board (L)
× 2
Flat head screws
(6 × 20 mm)
× 4
(YDP-S55)
× 2
(YDP-S35)
Thin screws (4 × 12 mm)
× 2
Tapping screws (4 × 20 mm)
Anti-fall bracket (L)
* The anti-fall brackets are not for earthquake countermeasures.
YDP-S55
Front board
AC adaptor
* The adaptor may not be included, or may look different from the
illustration above, depending on your particular area.
Side
board (R)
Pedal box
× 2
Caps
× 4
Long screws (6 × 25 mm)
× 4
Thick screws (6 × 16 mm)
Anti-fall bracket (R)
YDP-S35
AC adaptor
Power cord
1.
Align the side boards with each end
of pedal box, and lightly tighten with
flat head screws (6 × 20 mm) for
temporary fastening.
These screws will be tightened securely later in
step 3.
Leave the pedal cord out on the back side of the
instrument.
Side
board
(L)
2.
Attach the back board.
Depending on the model, the surface color of one
side of the back board may be different from the
other side. In this case, position the back board so
that the side facing the front (pedal side) matches
the color of the main unit.
2-1
Attach the top of the back board by
temporarily fastening the thin screws (4 ×
12 mm).
2-2
While pushing the lower part of the side
board from the outside, fix the lower side of
the back board on both sides with long
screws (6 × 25 mm). Also, fix the anti-fall
brackets together here.
2-3
Secure the remaining two places on the
lower side with tapping screws (4 × 20 mm).
YDP-165, YDP-145, YDP-S55, YDP-S35 Owner's Manual
Keyboard Stand Assembly
Pedal box
Side
board
(R)
Flat head screws
× 2
(6 × 20 mm)
37