1
8. EACH SETTING AND ADJUSTMENT
8.1 ADJUSTMENT
There is no information to be shown in this chapter.
A
8.2 HOW TO UPDATE THE FLASH ROMS FOR VARIOUS MICROCOMPUTERS
System, HDMI and DSP microcomputer
[Purpose]
Refer to this section when updating the firmware of each microcomputer is required by the service information, etc.
B
[Necessary Tools]
• PC with RS232C port
• RS-232C straight cable
(9pin female ↔ 25pin male)
[Connections]
Connect as shown in the figure below.
C
PC
RS-232C
Straight cable
D
E
F
62
1
2
It is placed inside the connection terminal cover of the main unit
(at the SW portion).
FFC
(VDA1681)
GGF1348
SX-LX70SW
2
3
• RS-232C Interface jig : GGF1348
• 7 pin FFC : VDA1681
• Updating program : UFU.exe
• Firmware file : ".mot" file
There are two connectors behind the plastic projection.
(The right one of the two connectors)...Common to all.
The left one is not used.
3
4
4