Sanyo FISHER DC-TS960WL Service Manual page 13

SERVICE MODE
7. Saving settings
7.1Make sure that "Market", "Region", "Tuner Selection" and
"RDS Availability" information are properly set. (If any of the
settings are incorrect, push cursor up or down key to move
highlighted area and update to the correct value.)
7.2 After ensuring that all the settings are correct, highlight the
EXIT area and push ENT key. The Market information
settings are now saved.
After a few seconds , the "Service Mode entry" is displayed
again for 3 seconds as shown on the right to ensure the
setting.
7.3 Push POWER key to POWER OFF.
8. Service mode entry
8.1"Service mode entry mode" displays Market information and
software information on the screen.
Region (0: Region undefined or Region Free , 1~6 : Region)
Market (JP/WL , depends on the selection)
Tuner (JP2, depends on the selection)
RDS (None, depends on the selection)
VersionS30822A2
- Brand (S: SANYO)
- Version (30822: 2003,8,22)
- Region (0:Region undefined or Region Free,
1~6:Region)
SYSCON version (Engineering department use only)
MPEG version (Engineering department use only)
LOADER version (Engineering department use only)
DSP version (11, displays software version of DSP in
hexadecimal)
Brand (S : SANYO)
Version ( 2 0 0 3 . 8 . 22)
Software version (A,B,......Z)
Region ( 0 : Region undefined
1 ~ 6 : Region defined )
All manuals and user guides at all-guides.com
Version S 30822 A 2
(Reference figure)
(Reference figure)
- 12 -