HOW TO PACK ............. 10 SPECIFICATIONS ..........11 TROUBLE SHOOTING ......... 12 Thank you very much for purchasing Toshiba fan. • , y l understand the content before using it. • After reading the manual, keep it handy for easy reference.
Stop using the fan immediately in case of abnormal operation or failure. (Risk of re, electrical shock, or other injury) Disconnect the power plug immediately and contact the store of purchase or Toshiba home appliances customer support center. <Example abnormality or failure>...
Page 3
Power plug or cord • Use an AC 230V power outlet. (Risk of re or electrical shock) Do not use an extension cord or overload the electrical circuit. • Be sure to fully insert the power plug into the outlet. (Risk of electrical shock or re due to generation of heat) •...
Page 4
Batteries for remote control • Do not leave expired or used batteries in the remote control. • Insert batteries with correct polarity of + and - in accordance with the polarity instructions. • Do not recharge, heat, disassemble or short the batteries or expose them to re. (Risk of burns or other injury due to leakage or rupture) In the case of contacting the uid, wash the body part thoroughly and consult with a doctor.
Page 5
IMPORTANT INFORMATION Operation and handling • Only plug the fan into a standard indoor wall-socket. Do not use the fan by connecting it to a DC-AC power transformer. Use of such devices may cause smoke or lead to a re. •...
INSTALLATION INSTALLATION Body Installation Body Installation Loosen Nut1 (counterclockwise) to remove it from Pole. Body Attach Pole to Base by inserting the Convex into Concave. Tighten Nut1 (clockwise) to x Pole rmly on Base. Loosen Knob.A (counterclockwise). Tighten Knob.A (clockwise) rmly after inserting Pole. Remove Spinner and Nut2 from Body.
Page 7
Fig. A Hooks Blade Spinner Rear Guard Front Guard Nut2 Fig. B Insert the groove of the blade in correct direction. Battery Installation Open the battery cover. Insert AAA type battery in Close the cover. correct direction. « : » l l o a l i t s i...
CONTROL PANEL Body Control Panel : For on/o timer setting TIMER TIMER : For selection MODE MODE NORMAL/NATURE/ SLEEP/SILENT SPEED : Adjustment for NORMAL SPEED SWING mode : For oscillation SWING : For turning on/o ON/OFF ON/OFF Remote Control Panel : Adjustment for SPEED : For turning on/o...
OPERATION TURN ON/OFF Press “ON/OFF” to turn on or turn o the fan. PROGRAMMED MODE Press “MODE” in Body control panel repeatedly, the programmed mode in the display will light on. ICON PROGRAMMED MODE OPERATION Select wind power with pressing “SPEED” repeatedly. NORMAL (Speed 1) (Speed 2)
SPECIFICATIONS F-LSA20(W)PH Model: 230V Rated Voltage: 60Hz Rated Frequency Power Consumption ø400mm Blade Diameter W : 465mm Unit Dimensions D : 405mm H : 1130-1350mm Approx. 7.2 kg Net Weight: Remote Controller Accessories Battery (AAA)
TROUBLE SHOOTING In the case of any abnormality when using this fan, please check the following points before requesting repair. Ref. Trouble Check the following page • Is the Fan blade installed properly? • Is the power plug properly inserted into the outlet? The blades do not spin.