Advertisement
3
Installing Drain pump kit
• Unscrew the two screws on the left of the air conditioner, and secure the fixture plate
pump unit using the two screws aligning the hole positions.
• Attach the Drain pump unit top plate to the air conditioner using the support bracket
(Use the attached tapping screws
• Secure the Drain pump unit using three hexagon bolts
Drain pump unit
4
Installing the Attachment plate
• Attach the attachment plate
• Use the attachment plate
• To install the fixture band
secure the fixture band
install the fixture.
(Since thread shearing may occur when an electric screwdriver is used, stop using it halfway and then
tighten the screw manually.)
and the air conditioner screws.)
to the air conditioner at the position shown below.
as a 5-degree ruler for the socket
, unscrew the screw located 358 mm away from the drain port, and then
with the screw. Drill a hole to the right with the tapping screws
358
24
with washer.
Drain port
and drain pipe
60
48
3
for the Drain
.
Air conditioner
.
, and then
Drain port
Secure the attachment
plate with the removed
screws.
Advertisement
