Advertisement
5
Hose Connecting
CAUTION
Be careful not to damage the Drain pump kit hose during handling before extending it because it
passes under the unit.
REQUIREMENT
Be sure to fix the center of the hose
a drain trap. (Water leakage may occur without this inclination.)
• Connect the elbow
adhesive for vinyl chloride to connect pipes.
• Install the elbow
5 degrees downward by tightening the socket
provide an inclination for the hose for draining.
• Connect the socket
hose with the hose bands
• Insulate the vinyl chloride joint and the hose at the Drain pump unit connection portion with the heat
insulation for pipe
Ensure heat insulation by taping at the insulator joint areas.
• Secure the fixture plate
(Be sure to install this fixture plate
Fixture plate for
Drain pump unit
Outlet drain pipe
Drain pump unit
Heat insulation
for pipe
to the air conditioner cabinet with the fixture band
, drain pipe
, and the socket
to the Drain pump unit inlet pipe with the hose
. Insert the hose
and heat insulation for elbow
to the attachment plate
as this is for ensuring an angle of 5 degrees.)
Fixture band
Drain hose with heat
Taping
insulation
<Enlarged view of joint>
Socket
to the drain port of the air conditioner. Use
to torque of 60 to 100 Nm to
into the joint by approx. 25 mm.
.
with the tapping screw
Tapping screw
Fixture plate
Heat insulation for elbow
Air conditioner
Taping
Install drain hose trap
Drain pipe
Elbow
4
to install
, and tighten both ends of the
.
Advertisement
