1 Warning Caution: • Pb free solder has a higher melting point that standard solder; Typicall the melting point is 50 - 70°F (30 - 40°C) higher. Please use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder- ing iron, please be careful not to heat too long.
4 Disassembly and Assembly Instructions Follow the procedure below to disassemble the main unit. 4.1. Disassembly Instructions [MAIN UNIT] Follow the procedure below to disassemble the main body. 1. Remove the cap and the epilation head. Loosen two screws on top and take out the mounting base B.
Page 6
4. Unsolder the three locations, battery terminals, motor lead wires and plug chassis. NOTE: If the motor lead wires are attached the opposite pole, the rotation speed will be decrease and the life of motor will become short. 5. Lift up the plug chassis. 6.
Page 7
4.2. Assembly Instructions [MAIN UNIT] For assembly, reverse the order of disassembly. 1. Confirm the colors of each lead wire when soldering with motor. 2. Press fit the lead wires into housing neatly. 3. Put fuse onto the motor and fixed it with the motor cush- ion.
Page 10
Model No. : ES2067 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks WES2067G3137 EPILATION HEAD FRAME FOR LEGS/ARMS 1 <BG> WES2045L9008 TAPPING SCREW 9 (K2-6), <BG> WES2067L0207 GEAR CASE RETAINING PLATE 1 <BG> WES2067L1267 EPILATION HEAD FOR LEGS/ARMS 1 <BG>...