Table of Contents
Advertisement
7.3
Replacing broken glass insert
7.4
Spare parts
Building Technologies
Fire Safety & Security Products
The glass insert is covered by a foil layer. This holds the glass splinters together
when the glass pane is pushed in, enabling trouble-free removal of the glass.
Procedure
B
A
Removing cover
1. Remove the cover of the manual call point using the key (movements A and B).
2. Remove the broken glass insert from the switching unit.
3. Insert a new glass insert. Be sure to tension the spring with the glass insert.
4. Refit the cover.
You will find spare parts in the 'Optional accessories' chapter.
See also
Optional accessories [
Maintenance / Repair
17]
A6V10201150_a_en_--
25
05.06.2008
Advertisement
Table of Contents
