Do-Not-Disturb Group; Interrogating Do-Not-Disturb - Siemens HiPath 4000 Operating Instructions Manual

Step by Step
PROG

Do-not-disturb group

Do-not-disturb group can be activated temporarily for certain groups
of stations if these stations do not wish to be disturbed by incoming
calls.

Interrogating do-not-disturb

Prerequisite: the terminal is idle or in call state.
Press Program menu.
Press 4.
The list of the first 8 station groups with do-not-disturb are displayed
on page 1 in memory layout.
DO NOT DISTURB
Group 1 ON or OFF
2 ON or OFF
to
Group 8 ON or OFF
The message ALL ON or OFF appears in line 11 if all groups are in the
same state.
If groups are being interrogated by another console, the menu cannot
be accessed.
If there are more than 8 groups:
scroll forwards with *, scroll backwards with #.
Do-not-disturb group
1+
55