Prepare Cabinet - Haier DW-7777-01 Installation Manual

English
Electrical shock hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
failure to do so can result in death or electrical shock.
Do not use an extension cord or adapter plus with this
appliance.

pREpARE cAbINET

1.
Disconnect the power supply. Turn water off. Put on gloves and safety
glasses.
2.
If you are replacing a dishwasher:
• Check that the water line "A" reaches to
the back left of opening where the water
connection will be made.
• Check that the direct line "B" reaches to the
back left of opening where the electrical
connection will be made.
If the water line and the direct wire reach into the opening far enough, go to step
10, page 13.
If you are installing a new dishwasher, complete all of the
following steps:
Electrical
follow all national and local codes and ordinances for completing electrical
supply to cabinet.
11
WARNING
If you are:
Direct Wiring
Using a power supply cord
use steps:
3, 4 and 5
3a and 4a