Sim Card Interface; Antenna Connector; Uart; Pin Socket - Huawei MU609 Development Kit Manual

Hspa lga module

Hide thumbs Also See for MU609:

Table of Contents

HUAWEI MU609 HSPA LGA Module

Development Kit Guide

For more information on the characteristics of the reset signal, please refer to the

module's hardware guide.

3.3.6 SIM Card Interface

The DVK provides a standard push to push SIM card interface on the DVK. The

module can support Class B/C SIM card. Before turn on the module, insert a SIM

card into the SIM card slot

For more information on the characteristics of the SIM card interface, please refer to

the module's hardware guide.

The DVK provides three antenna connectors: MAIN, AUX SMA RF connectors and

GPS coaxial antenna connector. The external antennas should be assembled well

before turning on the module.

SMA antenna connectors can be connected to an RF tester (CMU200 or Agilent

8960), or directly connected to external antennas for the testing services of the

existing network. The GPS coaxial antenna connector can be directly connected to

external GPS antenna for the test of GPS performance.

The DVK provide a 2-line UART interface and a 8-line UART interface.

There is also a monitor UART interface that you can use it to monitor

communication of the 8-line UART interface (UART0).

The DVK provides two 64-pin sockets for testing. The signals assignment of sockets is

shown in Figure 3-3 .

Issue 02 (2016-12-14)

Huawei Proprietary and Confidential

Description of the DVK

Table of Contents