Hardware Specifications - Hitachi HPW-200EC Hardware User's Manual

Handheld pc
Table of Contents

Advertisement

Precautions
After you start using your Handheld PC, you must maintain a constant supply
of power or all stored data will be erased.
When you use the AC adapter the main battery lock switch must be in the
LOCK position. Use only "HPW - WACA" AC adapter.
If your Handheld PC does not operate after you have not used it for a long
time, the main battery may have run down. If you believe this is the case,
connect the AC adapter.
If you have not used your Handheld PC for a long time or you use in case the
first time, rechargeable backup battery may have run down and "Backup
Battery Very Low" message will be displayed. In this case, continue to
connect the AC adapter or main battery more than one hour for charging the
Backup battery.
Do not open the main case of your Handheld PC.
If the very low battery warning message is displayed in your Handheld PC,
you must turn off your Handheld PC immediately and connect AC adapter
within 3 days.
If you intend not to operate your Handheld PC for an extended period of time,
it is recommended that you back up your data in the Handheld PC to your
Desktop PC.
Supported PC card voltage are 3.3v or 5.0v.
Don't insert any other cards which voltage is not 3.3v or 5.0v, otherwise the
PC card may be out of order.
Don't open RAM/ROM Cover except change ROM board or add RAM board.

Hardware Specifications

Physical Description and Features
Display
"
8.1
diagonally measured screen
640 by 240 Liquid Crystal color Display (LCD) and Touch Panel
Dimensions
Close: 10.0
"
"
"
x 5.2
x 1.3
(253x 131 x 32mm)
31

Advertisement

Table of Contents
loading

Table of Contents