Table of Contents
Advertisement
● fulfill the preconditions for utilizing "Safe Motion"
● always be connected to the first multiple encoder interface (EC) of the X4
● be supplied via the multiple encoder interface (EC) of the drive. (Supply vol-
● be electrically correctly connected to the multiple encoder interface as
The precondition for utilizing "Safe Motion" is described in detail in the appli-
cation manual "Rexroth IndraDrive Integrated Safety Technology "Safe Motion"
(as of MPx-18)", 911338920, see ⮫ Chapter 1.2 "Required and supplementary
documentation" on page 5. These preconditions must strictly be fulfilled.
5.2
Identification of the product
5.2.1
Nameplate of the servo-hydraulic actuator
Fig. 7: CytroForce-M nameplate
No.
1
2
3
4
5
6
7
8
9
10
12
13
RE62270-B, 01.21
interface at the control section.
tages of +5 VDC and +12 VDC are available.)
specified. Pay particular attention to a proper execution of shield connec-
tions.
Servo-hydraulic actuator
Identification of the product
Type of information
Manufacturer's logo
Material number
Type designation
-
Manufacturer's factory number
Date of production
-
-
-
Designation of origin
Customer job order
-
Bosch Rexroth AG
29 / 85
Advertisement
Table of Contents
