Retractable-Camera Assembly; Removing The Retractable-Camera Assembly - Dell Inspiron 24 5410 All-in-One Service Manual

Steps
1. Ensure that the thermal pad covering the M.2 2280 slot on the system board is in place.
2. Align the notch on the solid-state drive with the tab on the M.2 card slot.
3. Slide the solid-state drive into the M.2 card slot on the system board.
4. Replace the screw (M2x3.5) that secures the solid-state drive to the system board.
Next steps
1. Install the system-board
2. Install the I/O cover.
3. Install the back cover.
4. Install the stand.
5. Follow the procedure in

Retractable-camera assembly

Removing the retractable-camera assembly

Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the back cover.
4. Remove the I/O cover.
5. Remove the system-board
About this task
The following image indicates the location of the retractable-camera assembly and provides a visual representation of the
removal procedure.
34 Removing and installing components
shield.
After working inside your
Before working inside your
shield.
computer.
computer.