Change Code; Program Selection; Controls - Miele PDR 914 Operating And Installation Instructions

Change code

You can alter the access code to the supervisor level.
Enter the current code.

Enter a new code.


Program selection

Controls

You can select whether the tumble dryer is operated as a "laundromat" machine. Short-
cuts are the easiest way to operate the machine. Operating staff are unable to change
pre-set programs.
Tip: Start by configuring all necessary settings and changes to the tumble dryer before ad-
justing any of the options below.
Caution: When activating any of these options, the supervisor level will no longer be
available.
You will no longer be able to access the supervisor level via the display. Please follow
the instructions below if you wish to change any other settings.
Opening the supervisor level (laundromat version)
Switch the tumble dryer on and open the dryer door.

Touch the Start/Stop sensor control and hold it down while carrying out steps –.

Close the tumble-dryer door.

Wait until the Start/Stop sensor control, which will now be flashing quickly, lights up

constantly ...
... and then release the Start/Stop sensor control.

Standard
-
Factory default: All (selected) programs are available.
Laundromat, basic
-
4 programs are available.
Favorite programs
Under
Laundromat Logo
-
12 programs are available.
Favorite programs
Under
The first 3 programs can be selected directly. The remaining programs are selected via
another list.
- Laundromat Logo ext. time
4 timed-drying programs* with different temperature levels are time-controlled via an ex-
ternal payment system.
The set value indicates the program duration and cannot be modified by the user.
This option is only available with an external payment system.
, you can set which 4 programs to select/modify.
, you can set which 12 programs to select/modify.
Supervisor level
41