Table of Contents
Advertisement
- Do not put the cylinder into the freezer and/or into the fridge. If frozen do
not use it and keep it away from the body.
- Do not use the content for babies' food preparation.
- Do not alter and/or modify the cylinder and the valve.
- Keep away from children.
- DO NOT attempt to puncture, throw or burn the cylinder.
- DO NOT transport the soda maker with the cylinder attached.
- The use duration of the cylinder depends on the use frequency.
3 General description
Product overview
Refer to
A1
Machine rating of information:
Maximum Working Pressure: 116 psi/ 8 bar
Maximum Allowed Operating Temperature: 40°C / 104°F
4 Before creating fun
Installing the gas cylinder
1. Place the Philips soda maker in an upright position and on a flat surface.
Remove the carbonating bottle before installing or replacing the cylinder.
Remove the drip tray grid and then carefully lay the soda maker down on
the side.
2. Remove seal and cap from the CO2 cylinder. Carefully insert the cylinder
through the hole at the bottom. Don't drop the cylinder into the hole. When
you feel that it reaches the bottom, begin screwing the cylinder clockwise
until it is fastened. Don't screw too hard since this might break the threads
holding the gas cylinder in place.
8
A2-1
Advertisement
Chapters
Table of Contents
