Let The Fun Begin - Philips GoZero ADD4902 User Manual

3. When you need to replace the gas cylinder, lay the soda maker down on the
side and unscrew it counterclockwise and then carefully pull it out of the
compartment.

5 Let the fun begin

1. Fill the carbonating bottle
Rinse the carbonating bottle with cold water before you use it for the first
time. Fill the carbonating bottle with cold, clean water up to the marked
filling line.
2. Attach the carbonating bottle
Screw the carbonating bottle into the carbonating bottle socket. Screw
counterclockwise if viewed from above. Don't screw too hard - just make sure
the carbonating bottle sits properly.
3. Carbonate the water
Press the button downwards firmly until you hear a sound from the valve.
The carbonation time is 2-3 seconds for each time.
NOTE:
· NEVER continuously carbonate for over 5 seconds each time. It can lead to
gas wastes or personal injury.
· You can add more carbonation to the water by repeating the carbonating
process.
4. Ventilate the bottle
When hearing a buzzing sound after 3 seconds, you should release the
button back to horizontal position. Please allow the button release itself.
The remaining pressure in the carbonating bottle will be released with a puff
sound. Then the sparkling water is ready. You can unscrew the carbonating
bottle and enjoy it now.
A2-2
A3-1
A3-4
A3-2
A3-3
9