Sony PWS-4400 (SY) Service Manual page 52

Main Sub code Sub code
code (1) (2)
B3 42 pp
B3 43 pp
B3 44 pp
B3 47 pp
B3 51 pp
B3 52 pp
B3 53 pp
B3 54 pp
B3 55 pp
B3 56 pp
B3 57 pp
B3 58 pp
B3 59 pp
B3 5A pp
B3 5B pp
PWS-4400
Error message Description
PORT x DIO FPGA1 IN- Initialization error of FPGA1 on DIO-95 board that is
ITIAL ERROR installed to the port "x" (Port A to D) was detected.
•
•
PORT x DIO FPGA2 IN- Initialization error of FPGA2 on DIO-95 board that is
ITIAL ERROR installed to the port "x" (Port A to D) was detected.
•
•
PORT x DIO FPGA3 IN- Initialization error of FPGA3 on DIO-95 board that is
ITIAL ERROR installed to the port "x" (Port A to D) was detected.
•
•
PORT x DIO FPGA NOT FPGA on the DIO-95 board that is installed to the port
LATEST "x" (Port A to D) was not initialized by latest data, and
it was initialized by backup data.
•
•
PORT x DIO PROC1 IN- PROC1 IC on DIO-95 board that is installed to the port
ITIAL ERROR1 "x" (Port A to D) was not initialized (first stage).
•
•
PORT x DIO PROC1 IN- PROC1 IC on DIO-95 board that is installed to the port
ITIAL ERROR2 "x" (Port A to D) was not initialized (second stage).
•
•
PORT x DIO PROC1 IN- PROC1 IC on DIO-95 board that is installed to the port
ITIAL ERROR3 "x" (Port A to D) was not initialized (third stage).
•
•
PORT x DIO PROC2 IN- PROC2 IC on DIO-95 board that is installed to the port
ITIAL ERROR1 "x" (Port A to D) was not initialized (first stage).
•
•
PORT x DIO PROC2 IN- PROC2 IC on DIO-95 board that is installed to the port
ITIAL ERROR2 "x" (Port A to D) was not initialized (second stage).
•
•
PORT x DIO PROC2 IN- PROC2 IC on DIO-95 board that is installed to the port
ITIAL ERROR3 "x" (Port A to D) was not initialized (third stage).
•
•
PORT x DIO PROC3 IN- PROC3 IC on DIO-95 board that is installed to the port
ITIAL ERROR1 "x" (Port A to D) was not initialized (first stage).
•
•
PORT x DIO PROC3 IN- PROC3 IC on DIO-95 board that is installed to the port
ITIAL ERROR2 "x" (Port A to D) was not initialized (second stage).
•
•
PORT x DIO PROC3 IN- PROC3 IC on DIO-95 board that is installed to the port
ITIAL ERROR3 "x" (Port A to D) was not initialized (third stage).
•
•
PORT x DIO PROC4 IN- PROC4 IC on DIO-95 board that is installed to the port
ITIAL ERROR1 "x" (Port A to D) was not initialized (first stage).
•
•
PORT x DIO PROC4 IN- PROC4 IC on DIO-95 board that is installed to the port
ITIAL ERROR2 "x" (Port A to D) was not initialized (second stage).
•
•
Probable cause: IC1 on DIO-95 board
Protected operation: None
Probable cause: IC2 on DIO-95 board
Protected operation: None
Probable cause: IC3301 on DIO-95 board
Protected operation: None
Probable cause: IC1, IC2 on DIO-95 board
Protected operation: None
Probable cause: IC1000 on DIO-95 board
Protected operation: None
Probable cause: IC1000 on DIO-95 board
Protected operation: None
Probable cause: IC1000 on DIO-95 board
Protected operation: None
Probable cause: IC1200 on DIO-95 board
Protected operation: None
Probable cause: IC1200 on DIO-95 board
Protected operation: None
Probable cause: IC1200 on DIO-95 board
Protected operation: None
Probable cause: IC1400 on DIO-95 board
Protected operation: None
Probable cause: IC1400 on DIO-95 board
Protected operation: None
Probable cause: IC1400 on DIO-95 board
Protected operation: None
Probable cause: IC1600 on DIO-95 board
Protected operation: None
Probable cause: IC1600 on DIO-95 board
Protected operation: None
Continued
2-6