Main Code D2; Main Code D3; Main Code D4 - Sony PWS-4400 (SY) Service Manual

Main Sub code Sub code
code (1) (2)
D1 01 pp
D1 03 pp
2-2-8.

Main Code D2

When an error was detected during playback process, the following error occurs.
Main Sub code Sub code
code (1) (2)
D2 03 pp
2-2-9.

Main Code D3

When an error was detected while writing to the internal memory, one of the following errors occurs.
Main Sub code Sub code
code (1) (2)
D3 01 ss
D3 02 ss
2-2-10.

Main Code D4

When an error was detected while reading from the internal memory, the following error occurs.
Main Sub code Sub code
code (1) (2)
D4 01 ss
PWS-4400
Error message Description
PORT x ENC DMA1 ER- The memory data transfer error occurred on DIO-95
ROR board that is installed to the port "x" (Port A to D).
There is a possibility that the record is not normally
done.
•
•
PORT x ENC PROC ER- The encoding process error occurred on DIO-95 board
ROR that is installed to the port "x" (Port A to D). There is a
possibility that the record is not normally done.
•
•
Error message Description
PORT x DEC PROC ER- The decoding process error occurred on DIO-95 board
ROR that is installed to the port "x" (Port A to D). There is a
possibility that the playback is not normally done.
•
•
Error message Description
SLOT Mx AV WRITE A recording error of video and audio that originated in
ERROR1 the interface was detected in the internal memory.
•
•
•
SLOT Mx AV WRITE A recording error of video and audio that originated in
ERROR2 the memory was detected in the internal memory.
•
•
Error message Description
SLOT Mx AV READ A playback error of video and audio that originated in
ERROR1 the interface was detected in the internal memory.
•
•
•
Probable cause: IC200 on DIO-95 board
Protected operation: None
Probable cause: IC1000, IC1200, IC1400,
IC1600, IC1800 on DIO-95 board
Protected operation: None
Probable cause: IC1000, IC1200, IC1400, IC1600
on DIO-95 board
Protected operation: None
Probable cause 1: IC400 on MEC-40 board
Probable cause 2: Internal memory
Protected operation: None
Probable cause: Internal memory
Protected operation: None
Probable cause 1: IC400 on MEC-40 board
Probable cause 2: Internal memory
Protected operation: None
2-8