Other System Equipment
Turning the Monitor On and Off
Turning the Monitor On
To turn the Genesis Touch monitor on, press and hold the power button on the top side of the monitor until
you see the logo. The monitor cycles through initialization images and sounds. When it is ready, a Vitals
Now/Home screen similar to the following appears:
Turning the Monitor Off
To eliminate the possibility of a patient accidentally turning off the monitor, you must be within a
password protected area to turn it off.
Once a password has been entered, to turn the monitor off:
1. Press and hold the power button on the top side of the monitor. A window similar to the following
appears:
2. Select Power off. The monitor turns off.
4/16/14
P4820EN.04
© 2014 Honeywell HomMed. All rights reserved.
2 - 5