Controller Menu - Fujitsu Waterstage Split Comfort 5 Series Installation Manual

Controller Menu

▼ General
Only the parameters accessible at the levels:
U - end user.
I - Commissioning
S - Engineering.
are described in this document.
The access levels are specifi ed in the second column of
the table by means of the letters U, I and S.
The OEM parameters are not described and require a
manufacturer access code.
OK
Press and release
Time of day and date
User interface
Heating circuit 1 timer
programme
...
Press for 3
seconds
End user
Time of day and date
User interface
Heating circuit 1 timer
programme
...
▼ Recommended settings for the parameters depending on the installation's emitters
720 (CC1)
Heating curve
slope
1020 (CC2)
721 (CC1)
Curve
displacement
1021 (CC2)
740 (CC1)
Flow temp
setpoint Min
1040 (CC2)
741 (CC1)
Flow temp
setpoint Max
1041 (CC2)
DHW charging
time limitation
- 48 -
End user
OK
Start-up
Very Low Temperature
Radiators /
Heating-cooling fl oor
0.25 to 0.5
0
Factory (17°C)
50°C
5030 Factory (90 min)
▼ Setting parameters
- Selecting the desired level.
- Scroll the list of menus.
- Selecting the desired menu.
- Scroll the function lines.
- Selecting the desired line.
- Adjusting the parameter.
- Validate the setting by pressing OK.
- To return to the menu, press ESC.
If no setting is made for 8 minutes, the screen
automatically returns to the basic display.
Hours / minutes
Day/Month
Year
Specialist
Hours / minutes
Day/Month
Year
End date of summer time
End date of summer time
Low temperature
radiators
0.5 to 1.25
0
Factory (17°C)
Factory (60°C)
Factory (90 min)
Waterstage Split Comfort DHW Serie / INSTALLATION / 2125 - EN
OK
1 Time
2 Minutes
3
OEM
1
2
3
4 01.01...31.12
5
Classic
Dynamic radiators or
temperature
fan-coil heaters
radiators
0.4 to 1.1
4
30 or 35°C
65°C
40 min Factory (90 min)
OK
1...24 h
0...60 min
1.25 to 3
0
Factory (17°C)
65°C