Output
When installation analysis completes in the [Mic location/analysis] screen, the [Output] tab becomes able to be selected.
Select the [Output] tab to switch the screen to the [Output] screen.
In the [Output] screen, you can calculate an estimate from the design results and then print the estimate.
Estimate calculation
The total estimate amount is displayed below a list of the numbers of antennas and microphones and the numbers
of other required devices determined based on the numbers of antennas and microphones entered up until the
installation analysis.
1
Recalculate.
If necessary, edit the numbers of each microphone type (handheld and tie pin), chargers, and antenna power supply units
and then click the [Estimate calculation] button. The estimate is recalculated.
Important
● A change cannot be made to a number of devices that is definitely required to construct the system.
36