Table of Contents
Advertisement
7. VBS OUT.
VBS OUT connector outputs the composite video channel from the camera for monitoring purposes (where
available.)
When no video signal is input to the fibre adaptor MON input then the Fibre Adaptor generates a test pattern
that is transmitted and received at the base station.
8. VBS IN.
The VBS IN connection allows a composite video channel to be transmitted for output at the FA for e.g. a
TELEPROMPT or the RETURN VIDEO function described in the FA Connector section.
When no video signal is present the Base Station generates a test pattern that is transmitted and received at
the fibre adaptor.
9. INTERCOM/CALL I/O.
The 15W D-type Intercom connector has Inputs/Outputs for the Engineering and Production analogue audio
intercom signals as well as their corresponding Call logic signals.
10. ANALOGUE AUDIO.
The Analogue Audio output provides a programme audio output that is derived from the digital audio
embedded on the received 3G video (Not currently available.)
11. TALLY/PV.
Red and Green Tally connections and DTS2050 Operational Control Unit Preview contacts.
12. OPTION BNC.
Provides debayered 3G Video output without VF status displays.
13. AES OUTPUT.
The AES Audio output provides a programme audio output that is derived from the digital audio embedded on
the received 3G video (not currently available.)
14. RS485 SERIAL CHANNEL.
RS485 connection for accessories such as Lens Controllers.
15. RS232 SERIAL CHANNEL.
RS232 connection for accessories such as Lens Controllers.
16. ANALOGUE GENLOCK.
Black and Burst 625/525 and Tri Level Syncs input.
Advertisement
Table of Contents
