Program playback
Desired MD tracks can be selected and played in the desired order.
Use the MD CONTROL buttons on the normal control button panel of the remote control unit.
1
2
6
7
+ 10
18
XM-EX90
PLAY MODE
3
4
5
8
9
10
1 Load an MD.
See "MD playback (Basic operation)" on page 14.
2 Press £ then immediately press 7.
This sets the numeric keys to the MD mode.
3 Press PLAY MODE to select PROGRAM.
The display shows "PROGRAM" and the PROGRAM
indicator lights up.
• If some tracks have already been programmed, the
track number and program number of each track will
be displayed.
Each press of PLAY MODE switches the play modes as
follows:
PROGRAM
• PLAY MODE can be pressed only in stop mode. Be
sure to stop MD before pressing PLAY MODE.
4 Select desired track numbers using the
numeric keys.
Up to 32 tracks can be programmed.
Track No.
Lights.
PROGRAM
RANDOM
Off (Continuous play)
Program No.