Table of Contents
Advertisement
CD recording
The digital input from CDs can be recorded with a simple, one-touch operation by switching the input
automatically.
This method is available only when the Compu Link connection has been made among other optional
the components equipped with the Compu Link remote control system.
REC PAUSE
24
XM-EX90
CD REC
1 Load a recordable MD (Mini Disc).
2 Prepare the CD player.
Load CDs, press CD 1, CD 2 or CD 3 according to the
disc you want to record, then immediately press 7 of
the CD player. This selects the played CD.
Now set the CD player to the program play mode, etc.,
as required.
3 Press CD REC.
The CD player and MD recorder start simultaneously
and synchronized recording starts.
• The DIGITAL 1 input is selected automatically and the
DIGITAL 1 indicator lights up.
To stop recording:
Press &/CANCEL to stop recording.
Synchronized recording of the analog input
This method is available only when the Compu Link
connection (page 48) has been made among the
components.
1 Load a recordable MD (Mini Disc).
2 Prepare the CD player.
3 Start playing a CD.
4 Press REC PAUSE.
The MD recorder enters record-pause mode.
5 Press INPUT to select the analog input and adjust the
input level (see page 22).
6 Press 7 of the CD player.
The CD player enters stop mode.
7 Press ‹/8 of the CD player.
Synchronized recording starts.
Advertisement
Table of Contents
