Panasonic SX-KC600 Manual page 35

Various settings that enhance the functions of this instrument are accessed through the MENU function.
1.
Press the MENU button.
0 1
MENU
+ 4
RHYTHM
VARIATION
CANCEL
— 7
SOUND
2.
Use the number buttons to enter the menu
number of the setting you wish to display (two
digits).
• The + and - buttons and the TRANSPOSE/
PROGRAM buttons can also be used to select
the menu number.
MENU list:
[ ] indicates the name shown on the display.
01 to 06: PADS BANK SELECT [PAD BANK 1-6]
Select a BANK for the PERFORMANCE
PADS.
07: PART VOLUME [PT VOL]
Volume settings for each part.
08: PART SOUND [PT SOUND]
Sound settings for each part.
09: PART PANPOT [PT PAN]
Stereo setting for each part.
10: PART REVERB SEND [PT REV]
Depth settings for the REVERB for each
part.
11: PART CHORUS SEND [PT CHORS]
Depth settings for the CHORUS of each
part.
12: PART MIDI CHANNEL [PT MIDI]
MIDI channel settings for each part
13: PART LOCAL SETTING [PT LOCAL]
MIDI LOCAL CONTROL settings for each
part.
14: SONG TRACK MUTE [TR MUTE]
Mute setting for each track of a SONG.
15: SONG CLEAR [SONG CLR]
Clear all SONG tracks.
16: TRACK CLEAR [TR CLEAR]
Clear specified SONG tracks.
17: MIDI CLOCK [MIDI CLK]
MIDI CLOCK mode settings.
18: MIDI REALTIME COMMAND [MIDI RTC]
Setting to enable or disable the transmis-
sion/reception of MIDI REALTIME COM-
MAND data.
2 3
5 6
8 9
19: SPLIT POINT [SPLIT]
Change the split point on the keyboard.
20: MASTER TUNING [TUNING]
Fine adjustment of the tuning for the whole
instrument.
21: FOOT SWITCH ASSIGN [FOOT SW]
Assign a function to the Foot Switch (sold
separately).
22: LCD CONTRAST [CONTRAST]
Adjust the readability of the display.
23: DEMO LED [DEMO LED]
ON/OFF settings for the LED lighting of the
pad buttons during a DEMO performance.
24: ALL INITIAL [ALL INIT]
Reset this instrument to the original set-
tings.
3.
Press the EXECUTE button.
• The display changes to the setting display for
the selected MENU.
4.
Use the TEMPO/PROGRAM buttons, the
TRANSPOSE/PROGRAM buttons, or the EX-
ECUTE button to adjust the settings in the
selected menu.
TEMPO TRANSPOSE
PROGRAM PROGRAM
EXECUTE
5.
When you have finished making the settings,
press the MENU button again.
• If you execute a setting, there is also a menu
to exit the setting mode.
0 1 2 3
+ 4 5 6
CANCEL
— 7 8 9