Panasonic SX-KC600 Manual page 40

Phenomenon
Noise from a radio or TV can be heard.
The cabinet becomes warm during use.
(Rear panel)
MIDI OUT
Used for transmitting MIDI data. Connect the other
end of the MIDI cable to the MIDI IN terminal of
another instrument. This terminal is used, for ex-
ample, to generate sound from a connected instru-
ment by playing this instrument.
MIDI IN
Used for receiving MIDI data. Connect the other
end of the MIDI cable to the MIDI OUT terminal of
another instrument. This terminal is used, for ex-
ample, to generate sound from this instrument by
playing a connected instrument.
AUX IN (stereo pin cord)
Connect to the LINE OUT terminal of another in-
strument to this terminal. The sound from a con-
nected CD player, for example, can be output from
this instrument's speakers.
OUT IN FOOT
MIDI
SW
SZ-P1 Foot Switch
Remedy
• This sometimes occurs when electrical equipment
such as a radio or TV is used near the instrument.
Try moving such electrical equipment further away
from the instrument.
• The sound may be coming from a nearby broadcast
station or amateur radio station. If the sound is
bothersome, consult your dealer or service center.
• This instrument has a power source that heats the
cabinet to some degree. This is not an indication of
trouble.
L
AUX IN
R
PHONES/
LINE OUT
FOOT SW
An optional SZ-P1 Foot Switch (sold separately)
can be connected to this terminal to control various
functions.
PHONES/LINE OUT (output level 1.5 Vrms, 16 Ω)
Headphones, a keyboard amplifier, or stereo
equipment can be connected to this terminal. When
another apparatus is connected to this terminal,
the speaker system is automatically switched off,
and sound is heard only through the connected
device.
DC IN
12V