Table of Contents
Advertisement
Help Guide
Data Projector
VPL-GTZ380
Message Lists
Warning messages
Messages
High temp.! Light off in 1 min.
Frequency is out of range!
Projector temperature is high. High Altitude Mode
will change. Set it properly, if Projector is being
used at high altitude.
Power Saving Mode is set. Projector will
automatically enter Standby Mode in 1 minute.
Caution messages
Messages
Not applicable!
Settings Lock
enabled.
Related Topic
Parts and Controls (Main Unit)
Preset Signals
Menu Operation: High Altitude Mode
Menu Operation: Power Saving
Menu Operation: Settings Lock
No signal is input in the selected input terminal. Check connections.
The operation to be activated by the button is currently prohibited. Press the appropriate
button.
[Settings Lock] is set to [Level A] or [Level B].
Meaning/Solution
Turn off the power.
Check to ensure that nothing is blocking the ventilation
holes.
Frequency of the input signal is out of range. Input a signal
within the acceptable frequency range of the unit.
When using the unit in a location at a high altitude, appropriately
set [High Altitude Mode].
When the temperature inside the unit remains high, [High
Altitude Mode] is switched to [Level 2] in 1 minute, then the fan
rotation speed increases.
[Power Saving] is set to [Standby].
If no signal is input, the power turns off after 1 minute, then the
unit goes into standby mode.
Meaning/Solution
156
Advertisement
Table of Contents
