Projecting Images; Turning Off The Power - Sony VPL-GTZ380 Help Manual

Help Guide
Data Projector
VPL-GTZ380

Projecting Images

Select an input device to project an image.
Turn on the projector and the connected device.
1
Press the INPUT button.
2
The input selection window appears.
Press the INPUT button repeatedly to select the device from which you want to display images.
3
You can also select the desired device by pressing the
You can change the input terminal with the A to E buttons on the remote control.

Turning Off the Power

1.
Press the / (On/Standby) button twice on the control panel or press the
control.
Shutdown is started, then the projector is turned off.
2.
Unplug the AC power cord from the wall outlet.
Note
Never disconnect the AC power cord while the projector is turned on.
Hint
When [Status] is set to [Off] in the
switches input terminals sequentially.
Related Topic
Menu Operation: Status
Operation With the Remote Control RM-PJ24
/
[Setup] menu, the input selection window does not appear. Pressing the INPUT button
5-023-481-14(1) Copyright 2020 Sony Corporation
42
(Up/Down) button and the ENTER button.
(Standby) button once on the remote