JVC 250 Service Manual page 175

Chapter 8---Software and Protocol
6. Windows TERMINAL: Transfers + Send Text File....
6.1 Directories - set directory to desired upload directory (C:\TEMP)
6.2 File Name: - Type desired File Name (for example: import1.txt)
6.3 Select OK with mouse or press Enter key (upload begins)
6.4 Verify TERMINAL screen shows status line at bottom:
Stop, Pause, "% complete bar", Sending: EXPORT1.TXT
6.5 Data transfer will continue until complete or an error occurs or the
User Aborts: Expect 10 minutes to import 20 sources (500,000 bytes)
at 9600 baud.
6.6 At successful end, TERMINAL will remove the bottom line.
7. Model 250 Menu:
When the projector detects the successful end of the transfer the following
screen is displayed:
Press ESC to exit the projector Import operation and return to the
Maintenance Menu. There is a 10 second pause before the screen is
redrawn.
8. USER ABORT:
Windows TERMINAL: FIRST press STOP to end the Host Upload
transfer.
Model 250 Menu: THEN press ESC to abort the projector Import
operation.
8-8
| Import Configuration
| Start SEND TEXT Upload from
| Host on Serial PORT A
| -To Abort:
| ->Stop Host Upload,
| ->THEN Press ESC to Abort
=================================
=================================
| Import Configuration
| IMPORT COMPLETE
| New Configuration is active
|
| - Press ESC to Continue
=================================
=================================
Import Failed
|
| IMPORT ABORTED BY USER
| Old Data was Restored.
| - STOP Host SEND DATA,
| THEN Press ESC
=================================
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Model 250 Service Manual