Communications Protocol - JVC 250 Service Manual

Communications Protocol

Select SETTINGS using the menu bar, then select COMMUNICATIONS. Set the
following communications parameters and modes.
Table 8-2 Communications settings
Baud Rate
Data Bits
Parity
Parity Check
Connector
Select FILE from the menu bar and select NEW. Under File Name enter VT-
100.TRM. This will allow the user to select the file VT-100.TRM with the
above parameters saved for future use.
Table 8-3 VT-100 Terminal and Remote Command Equivalents
Action
Power OFF
(All)
Power ON (All)
Power ON/OFF
Power
ON/OFF-
Electronics only
Power ON/OFF
Lamp
Left Arrow
Right Arrow
Up Arrow
Down Arrow
Back out of
menu
Blanking
Bow, H & V
Brightness
Model 250 Service Manual
9600
8
None
No
Com1-This is PC
configuration
dependent.
Keyboard Executive
Input Remote Keys
CTRL + F
CTRL + U
CTRL-P POWER
CTRL + E
CTRL + L
Left Arrow Left Arrow
Right Arrow Right Arrow
Up Arrow Up Arrow
Down Arrow Down Arrow
Esc ESC
B
U
I BRT
Chapter 8---Software and Protocol
Stop Bits 1
Flow Control Xon/Xoff
Carrier Detect No
Service
Remote Keys
POWER
Left Arrow
Right Arrow
Up Arrow
Down Arrow
ESC
BLANK
BOW
BRT
Dec. Hex.
6 6
21 15
16 10
5 5
12 0C
27 91 1B 5B
68* 44*
27 91 1B 5B
67* 43*
27 91 1B 5B
65* 41*
27 91 1B 5B
66* 42*
27 1B
66 42
85 55
73 49
8-11