Futher information and explanations are available online: Table of contents 1 Safety .......... 4 6 Before using for the first time ... 20 1.1 General information.... 4 6.1 Starting an empty washing cycle ......... 20 1.2 Intended use....... 4 1.3 Restriction on user group... 4 7 Display ........
Page 3
14 Childproof lock...... 33 14.1 Activating the childproof lock ......... 33 14.2 Deactivating the childproof lock ......... 33 15 Basic settings...... 34 16 Cleaning and servicing .... 34 16.1 Cleaning the drum.... 34 16.2 Cleaning the detergent drawer........ 34 16.3 Cleaning the drain pump.. 35 17 Troubleshooting.......
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
Safety en 1.4 Safe installation Take note of the safety instructions when installing the appliance. WARNING ‒ Risk of electric shock! Improper installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing.
en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. WARNING ‒ Risk of suffocation! Children may put packaging material over their heads or wrap themselves up in it and suffocate. ▶...
Page 7
Safety en ▶ Call customer services. → Page 49 An ingress of moisture can cause an electric shock. ▶ Only use the appliance in enclosed spaces. ▶ Never expose the appliance to intense heat or humidity. ▶ Do not use steam- or high-pressure cleaners, hoses or sprays to clean the appliance.
Page 8
en Safety Unwashed laundry that has come into contact with solvents, oil, wax, wax remover, paint, grease or stain remover may ignite when drying is in progress. ▶ Do not place laundry in this appliance to be dried if the laundry has not been washed first.
Safety en CAUTION ‒ Risk of chemical burns! If the detergent drawer is opened, detergent and care products may spray out from the appliance. Contact with eyes or skin may cause irritation. ▶ Rinse eyes and/or skin thoroughly with clean water if they come into contact with detergents or care products.
en Preventing material damage Ensure that the inner diameter of ▶ 2 Preventing material the water tap is at least 17 mm. Make sure that the length of the damage ▶ thread on the connection to the water tap is at least 10 mm. Follow these instructions to avoid ma- If the water pressure is too high or terial damage and damage to the ap-...
Environmental protection and saving energy en Remove all detergent residue, Set the maximum spin speed if you ▶ spray residue or other residues im- want to dry the laundry in the appli- mediately if they come into contact ance afterwards. with the appliance. a The drier the laundry, the shorter the programme duration when dry- ing which, in turn, reduces energy...
en Installation and connection Remove any packaging and pro- ¡ Water inlet hose tective covers completely from the → "Connecting the water inlet appliance. hose", Page 15 ¡ Screws and cover plate → "Disposing of packaging", Page 11 4.3 Requirements for the in- Check the appliance for visible stallation location damage.
Installation and connection en the appliance for the first time. If in Installation loca- Requirements doubt, contact a specialist to have it tion removed. Base Secure the appli- ance with fixing WARNING brackets Risk of injury! → Page 30. When the appliance is tilted, the ap- pliance may tip over.
en Installation and connection Remove the foam tray under the 4.5 Removing the transit appliance. bolts The appliance is secured for trans- portation using transit bolts on the rear of the appliance. Note: Keep the transit bolt screws and the sleeves in a safe place for fu- ture transport → Page 48.
Installation and connection en Remove the power cable from the Press down on the 4 cover caps. holder. 4.6 Connecting the appliance Remove the 4 sleeves. Connecting the water inlet hose Connect the water inlet hose. Put on the 4 cover caps. Connect the water inlet hose to a tap (26.4 mm = 3/4").
en Installation and connection Water outlet connection types 4.7 Aligning the appliance This information is intended to help In order to reduce noise and vibra- you to connect this appliance to the tion and to prevent the appliance water outlet. from moving, align the appliance cor- rectly.
Installation and connection en Screw the lock nuts tightly against the housing using a WAF 17 wrench. In doing so, hold the foot tight and do not adjust its height. 4.8 Connecting the appliance to the electricity supply Note: Your electrical domestic install- ation for this appliance must comply with the local legal provisions and safety regulations, and should in-...
Page 18
en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Maintenance flap for the drain pump → Page 35 Door Detergent drawer → Page 19...
Familiarising yourself with your appliance en 5.2 Detergent drawer Compartment II: ¡ Detergent for main wash ¡ Water softener ¡ Bleach ¡ Stain remover Compartment ¡ Fabric softener ¡ Liquid starch ¡ Waterproofing agent Compartment I: ¡ Detergent for prewash ¡ Hygiene detergent 5.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.
en first time Start the first wash cycle or set the first time 6 Before using for the programme selector to 停止 to switch off the appliance. first time → "Basic operation", Page 31 Prepare the appliance for use. first time 6.1 Starting an empty wash- ing cycle Your appliance was inspected thor- oughly before leaving the factory.
Page 21
Display en 7 Display The display shows the current settings, options or relevant information. Example: Display display Designation Description 0:40 Programme dura- Approximate expected programme dura- tion/programme tion or programme time remaining. time remaining "Ready in" time → "Buttons", Page 24 7,0 kg Recommended The maximum load capacity for the selec- load ted programme in kg.
Page 22
en Display display Designation Description Rinse Programme status Spin Programme status End of pro- Programme status gramme Drying Programme status Anti-crease Programme status Childproof lock ¡ lights up: The childproof lock is activ- ated. ¡ flashes: The childproof lock is activated and the appliance has been operated.
Page 23
Display en display Designation Description ¡ No water pressure. ¡ The water pressure is too low. E:35 / -10 Error Error code, error display, signal. Example...
en Buttons 8 Buttons Button Selection Description 温度 (Tem- – 90 °C Adjust the temperature in °C. perature) 转速 - 1400 rpm Adjust the spin speed or deactivate (SpinSpeed) the spin cycle. is selected, the water is drained and the spin cycle is deactivated.
Page 25
Buttons en Button Selection Description 热风除菌 ¡ Activate Activate or deactivate gentle pretreat- (Hygiene ment of dry laundry with hot air up to ¡ Deactivate Care) 65 °C for increased hygiene de- mands. After the fabrics have been pretreated with hot air, they are washed at low temperatures.
en Programmes 9 Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. Max. load load (kg) (kg) Wash Dry- Wash hard-wearing items made from cotton, 10,0 棉织物 Cottons linen or blended fabrics. Also suitable as a short programme for nor- mally soiled laundry when you activate ...
Page 27
Programmes en Programme Description Max. Max. load load (kg) (kg) Wash Dry- Rinse and then spin the laundry, and drain the – – 单漂洗 Rinse water. Programme setting: Max. 1400 rpm Spin and drain the water. – – 单脱水 Spin Do not use fabric softener. Programme setting: Max.
Page 28
en Programmes Programme Description Max. Max. load load (kg) (kg) Wash Dry- Use a detergent that is suitable for down or delicates. Use sparingly. Do not use fabric softener. Note: To prevent excessive foaming, remove air from laundry items by rolling them up be- fore you wash them.
Page 29
Programmes en Programme Description Max. Max. load load (kg) (kg) Wash Dry- Kill bacteria in jackets made of cotton or – 干衣除菌烘 FastHygiene down jackets. Note: The laundry is not dried or washed. Reduce creases and air-based odours from – 微蒸空气洗 Steam Air- suits and fabrics made of linen or wool.
QR code in the table of hooks and eyes – Tie cloth belts, apron strings, contents or on www.bosch-home.cn. etc. together or use a laundry 11.1 Preparing the laundry bag. – Tie together longer drawstrings,...
→ "Installation and connection", Notes Page 11 ¡ More detailed instructions for use can be found on www.bosch- Turn the programme selector to a ▶ home.cn or by scanning the QR programme. code on the title page of this user Note: The lighting for the drum goes...
en operation Requirement: The laundry is pre- Notes pared. ¡ If the laundry is not removed, the Anti-Crease programme starts after → "Laundry", Page 30 15 minutes. The programme takes Open the door. around 30 minutes. The display Make sure that the drum is empty. shows 0:00,...
Childproof lock en Wipe the rubber gasket dry and re- 13.9 Cancelling the pro- move any foreign objects. gramme Press 开始 / 添衣. Open the appliance door. The appliance door remains locked for safety reasons if the temperature and water levels are high.
Note: You can find further information in the digital instruction manual by scanning the QR code in the table of contents or on www.bosch-home.cn. 16 Cleaning and servi- Pull out the insert upwards. cing To keep your appliance working effi- ciently for a long time, it is important to clean and maintain it carefully.
Cleaning and servicing en Fit the insert and click it into place. Open and remove the service flap. Clean the opening for the deter- Slide a sufficiently large container gent drawer. under the opening. Push in the detergent drawer. Take the drain hose out of the holder.
Page 36
en Cleaning and servicing Cleaning the drain pump CAUTION - Risk of scalding! When you wash at high temperat- Requirement: The drain pump is ures, the detergent solution gets empty. → Page 35 hot. Since water may remain in the Do not touch the hot detergent ▶...
Page 37
Cleaning and servicing en Screw the pump cap as far as it will go. 90° The handle on the pump cap must be in a vertical position. Insert and close the service flap.
en Troubleshooting 17 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
Page 39
Troubleshooting en Fault Cause and troubleshooting The display goes out Energy-saving mode is active 开始 / 添衣 Press any button. ▶ flashes. a The symbol lights up again. "E:36 / -10" Drain pipe or water outlet hose is blocked. Clean the drain pipe and the water outlet hose. ▶...
Page 40
en Troubleshooting Fault Cause and troubleshooting The tap is turned off. Turn on the tap. ▶ The water inlet hose is kinked or jammed. Ensure that the water inlet hose is not kinked or ▶ jammed. Water level measurement system is defective. Call the after-sales service.
Page 41
Troubleshooting en Fault Cause and troubleshooting The programme does Door is not closed. not start. Close the door. Press 开始 / 添衣 to start the programme. Childproof lock is activated. → "Deactivating the childproof lock", Page 33 ▶ 预约 is activated. Check whether ...
Page 42
en Troubleshooting Fault Cause and troubleshooting The water is not drain- Unapproved extension installed on the water drain ing. hose. Remove any unapproved extensions from the water ▶ hose. → "Connecting the appliance", Page 15 The pump cap is not fully screwed in. Ensure that the pump cap is screwed in all the way ▶...
Page 43
Troubleshooting en Fault Cause and troubleshooting Drum rotates, water Load detection is active. does not flow in. Not a fault – no action required. ▶ Note: The load detection can take up to two minutes. Heavy foam build-up Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric ▶...
Page 44
en Troubleshooting Fault Cause and troubleshooting Loud noises during → "Removing the transit bolts", Page 14. ▶ the spin cycle. Banging noises, rat- Foreign bodies have got into the drain pump. tling in the drain → "Cleaning the drain pump", Page 35 ▶ pump. Slurping, rhythmical The drain pump is active, the detergent solution is suction noise.
Page 45
Troubleshooting en Fault Cause and troubleshooting Water is leaking out at Water inlet hose is not correctly/securely connected. the water inlet hose. Connect the water supply hose correctly. → "Connecting the water inlet hose", Page 15 Tighten the screw connection. Water is leaking out at The water outlet hose is damaged.
Page 46
en Troubleshooting Fault Cause and troubleshooting The laundry is too The ambient temperature is greater than 30 °C. damp. Ensure that the ambient temperature is lower than ▶ 30 °C. Insufficient air circulation at the appliance's installation location. Ventilate the appliance's installation location. ▶...
Page 47
Troubleshooting en Fault Cause and troubleshooting 开始 / 添衣 cannot Drying phase active. be operated. Not a fault – no action required. ▶...
→ "Before using for the first time", Note: You can find further information Page 20. in the digital instruction manual by scanning the QR code in the table of contents or on www.bosch-home.cn. Turn off the tap. Empty the water inlet hose. Switch off the appliance.
Customer Service en 18.4 Disposing of old appli- 19 Customer Service ance If you have any queries on use, are Valuable raw materials can be re- unable to rectify faults on the appli- used by recycling. ance yourself or if your appliance needs to be repaired, contact Cus- WARNING tomer Service.
en Consumption values Maximum load 10,0 kg 20 Consumption values Mains voltage 220 V, 50 Hz Minimum in- Model WNB254X00W stallation protec- Washing class tion Energy consump- 0,790 kWh/cycle Nominal power 1900 W tion Nominal power, 2000 W Water consump- 54,0 l/cycle drying tion Water pressure ¡ Minimum: Energy efficiency 1.03 100 kPa when washing...
Applicable standard en GB 4343.1 Electromagnetic GB 19606 Noise limit values compatibility re- for household quirements for and similar elec- household appli- trical appliances ances, electric tools and similar apparatus – Part 1: Emission GB 17625.1 Electromagnetic compatibility – Limits – Limits for harmonic cur- rent emissions (equipment input...
Page 56
Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.