Usb Operation; Line In (Aux In) Operation - JVC BOOMBLASTER XS-D528BE Instruction Manual

USB Operation

By connecting a USB mass storage device (including USB flash memory, USB flash players or
memory cards) to this unit, you can enjoy the device's stored music through the unit.
1. Insert the USB device into the USB
PLAYBACK 5V
top of the unit. The unit will switch into USB
mode automatically and start playback.
Or
Press SOURCE button repeatedly to select the
USB source. The word "USB" will be showed
on the display. If there is no USB device
connected, the display will show "NO USB".
2. Press button to pause/resume playback.
3. Press and hold
next/previous album, and play the first track.
• The player supports the USB music file format of MP3 only.
• The unit can support USB devices with up to 32 GB of memory.
• The unit may not be compatible with all USB devices, this is not an indication of a problem with the
unit.

LINE IN (AUX IN) Operation

1. While in ON mode, press the SOURCE button to select the Line in / Audio in mode. The
words "LINE" / "AUDIO" will be shown on the display.
2. Operate your audio device directly for playback features.
3. Turn VOL +/– dial to adjust the volume to your desired level.
buttons are invalid in Line in and Audio in sources.
The and
0.5A socket on the
or button to select
USB PLAYBACK
MIC IN GUITAR IN LINE IN
EQ
MIC VOL .
MIC ECHO VOL .
VOL
B OOS TE R
GB
CHARGE OUT
2.1
LIGHT
GUITAR VOL .
15