HP A-F1000-E Installation Manual page 63

Front panel
Figure 39 Front panel of 1EXP
(1) Captive screw
(3) Carrier signal LED (LINK/ACT) of XFP
LEDs
Table 32 Description of the LED on the front panel of 1EXP
Status
Off
Solid green
Flashing green
Interface specifications
Table 33 Interface specifications of 1EXP
Item
Connector type
Supported frame format
Interface speed
Optical transmit
power
Receiving sensitivity
Central wavelength
Max. transmission distance
Fiber type
NOTE:
In LAN PHY mode, 10GBASE-R is supported. In WAN PHY mode, 10GBASE-W is supported.
Meaning
No link is present.
A link is present, but no data is being received or transmitted.
The XFP port is receiving or sending data.
Specification
XFP/LC
10GBASE-R/W
•
LAN PHY mode: 10.3125 Gbps
•
WAN PHY mode: 9.95328 Gbps
Type Multi-mode short haul
Min. –7.3 dBm
Max. –1.08 dBm
–7.5 dBm
850 nm
0.3 km (0.19 miles)
62.5/125 μm
multi-mode
(2) XFP interface
(4) Ejector lever
Single-mode medium haul
–8.2 dBm
0.5 dBm
–10.3 dBm
1310 nm
10 km (6.22 miles)
9/125 μm single-mode
58
Single-mode long haul
–1 dBm
2 dBm
–11.3 dBm
1550 nm
40 km (24.86 miles)
9/125 μm single-mode