2700 psi max 2.5 gpm max pressure washer cleaning system (56 pages)
Summary of Contents for Craftsman 580.752700
Page 1
CAUTION: Before using this product, • Parts read this manual and follow all Safety • Español Rules and Operating Instructions. SEARS, ROEBUCK and CO., Hoffman Estates, IL 60179 U.S.A. Visit our Craftsman website: www.sears.com/craftsman Part No. 194320GS Draft 3 (10/05/2004)
LIMITED WARRANTY ON CRAFTSMAN PRESSURE WASHER For one year from the date of purchase, when this Craftsman pressure washer is maintained and operated according to the instructions in the owner's manual, Sears will repair, free of charge, any defect in material and workmanship.
Page 3
WARNING WARNING The engine exhaust from this product contains Fuel and its vapors are extremely flammable chemicals known to the State of California to cause and explosive. cancer, birth defects, or other reproductive harm. Fire or explosion can cause severe burns or death.
Page 4
WARNING WARNING Spray contact with electrical wiring can High pressure spray can cause paint chips result in electrocution. or other particles to become airborne. • Keep water spray away from electric wiring or fatal electric shock may result. • Always wear eye protection when using equipment or when in vicinity of equipment in use.
KNOW YOUR PRESSURE WASHER Read this owner’s manual and safety rules before operating your cleaning system. Compare the illustrations with your cleaning system to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. Spray Gun Chemical Reservoirs Spray Tips...
1-800-222-3136. ASSEMBLING CLEANING SYSTEM Attach Chemical Hose to Pump Your Craftsman cleaning system will need assembly before operation: Attach chemical hose to chemical injection fitting on 1. Attach handle to main unit. pump.
Page 7
NOTE: You may not need to use all the supplied oil. 5. Replace and tighten dipstick. NOTE: Check oil often during engine break–in. Add Fuel WARNING Fuel and its vapors are extremely flammable and explosive. Attach Hose Reel Fire or explosion can cause severe burns or death.
Page 8
Connect Hose and Water Supply to Pump 6. Connect garden hose (not to exceed 50 feet in length) to water inlet. Tighten by hand. IMPORTANT: To avoid pump damage, you must assemble the nozzle extension to the spray gun and CAUTION attach all hoses before you start the engine.
OPERATION HOW TO USE YOUR CLEANING To Start Your Cleaning System SYSTEM To start your engine-powered cleaning system for the first time, follow these instructions step-by-step. This If you have any problems operating your pressure information also applies whenever you start the engine washer, please call the pressure washer helpline at after you have let the pressure washer sit idle for at 1-800-222-3136.
Page 10
10. Move throttle lever to “Fast” position, shown here WARNING as a rabbit. Running engines produce heat. Temperature of muffler and nearby areas can reach or exceed 150°F (65°C). Severe burns can occur on contact. Combustible debris, such as leaves, grass, brush, ect.
Page 11
How to Use Spray Tips Cleaning and Applying Chemical The nozzle extension quick–connect allows the use of IMPORTANT: Use soaps designed specifically for several different spray tips. Each spray tip provides a pressure washers. Household detergents could different spray pattern. damage the pump.
Page 12
Pressure Washer Rinsing How to Use the Hose Reel Your cleaning system is equipped with a hose reel After detergent is applied, scour the surface and rinse designed to store the hose when unit is not in use. it clean as follows: See “Prepare Unit for Storage”...
ENGINE TECHNICAL INFORMATION PRODUCT SPECIFICATIONS This is a single cylinder, overhead valve(OHV), air Pressure Washer Specifications cooled engine. It is a low emissions engine. Pressure ....2,500 PSI In the State of California, Model Series 120000 Flow Rate .
MAINTENANCE OWNER’S RESPONSIBILITIES Follow the hourly or calendar intervals, whichever occurs first. More frequent service is required when operating in adverse conditions noted below. MAINTENANCE SCHEDULE FILL IN DATES AS YOU SERVICE DATES COMPLETE REGULAR SERVICE SERVICE DATES Every 25 Every 50 Every 100 Before...
Page 15
PRESSURE WASHER MAINTENANCE Check In-Line Filter Refer to the illustration and service the in-line filter if it Clean Debris becomes clogged, as follows: Daily or before use, clean accumulated debris from cleaning system. Keep linkage, spring and controls In-line Filter clean.
Page 16
Nozzle Maintenance Pump Maintenance A pulsing sensation felt while squeezing the spray gun Changing Pump Oil trigger may be caused by excessive pump pressure. Change oil every 50 hours or once yearly, whichever The principal cause of excessive pump pressure is a occurs first.
Page 17
ENGINE MAINTENANCE 4. Tip your pressure washer to drain oil from oil fill into a suitable container making sure you tip your WARNING unit away from spark plug and air cleaner. When crankcase is empty, return pressure washer to upright position. Unintentional sparking can result in fire or 5.
Page 18
Service Spark Plug If the engine has been running, the muffler will be very hot. Allow the muffler to cool before servicing the Service the spark plug every 100 hours of operation or spark arrester. yearly, whichever occurs first. • Remove spark arrester screen for cleaning and 1.
STORAGE AFTER EACH USE WINTER STORAGE Water should not remain in the unit for long periods of CAUTION time. Sediments or minerals can deposit on pump parts and “freeze” pump action. Follow these You must protect your unit from freezing temperatures. procedures after every use: •...
Page 20
LONG TERM STORAGE Oil Cylinder Bore • Remove spark plug. Squirt about 1 tablespoon of If you do not plan to use the pressure washer for more clean engine oil into the cylinder. Cover spark plug than 30 days, you must prepare the engine and pump hole with rag.
TROUBLESHOOTING Problem Cause Correction 1. Low pressure spray tip 1. Replace spray tip with high pressure installed. spray tip. 2. Water inlet is blocked. 2. Clear inlet. 3. Inadequate water supply. 3. Provide adequate water flow. 4. Inlet hose is kinked or leaking. 4.
PARTS CRAFTSMAN 2500 PSI Cleaning System 580.752700 Main Unit — Exploded View...
Page 23
CRAFTSMAN 2500 PSI Cleaning System 580.752700 Main Unit — Parts List Item Part # Description 194667GS BASE M194719GS HANDLE 194316GS ASSY, Billboard 194662GS KIT, Chemical Tank 194663GS KIT, Chem Caps with Tags 192645GS KIT, Engine/Pump Mounting Hardware 194664GS KIT, Chem Tank Hardware...
EMISSION CONTROL SYSTEM WARRANTY Sears, Roebuck and Co., U.S.A. (Sears), the California Air Resources Board (CARB) and the United States Environmental Protection Agency (U.S.EPA) Emission Control System Warranty Statement (Owner's Defect Warranty Rights and Obligations) EMISSION CONTROL WARRANTY COVERAGE IS a.
Page 31
Emissions Durability Period and Air Index Emissions Compliance Period On Engine Information On Your Engine Emissions Label Emissions Compliance Label Engines that are certified to meet the California Air After July 1, 2000 certain Sears engines will be certified to Resources Board (CARB) Tier 2 Emission Standards must meet the United States Environmental Protection Agency display information regarding the Emissions Durability Period...
Durante un año a partir de la fecha de compra, Sears reparará, sin cargo alguno, cualquier defecto en material y mano de obra, siempre y cuando esta máquina lavadora a presión Craftsman haya sido mantenida y puesta en funcionamiento de acuerdo a las instrucciones suministradas en el manual del propietario.
ADVERTENCIA ADVERTENCIA El escape del motor de este producto contiene La combustible y sus vapores son elementos químicos reconocidos en el Estado de extremadamente inflamables y explosivos. California por producir cáncer, defectos de nacimiento El fuego o una explosión pueden causar u otros daños de tipo reproductivo.
Page 34
ADVERTENCIA ADVERTENCIA El contacto del rocío con alambrado eléctrico El rociado de alta presión puede hacer que puede tener como resultado electrocution. partículas pequeñas de pintura u otras partículas salgan disparadas y viajen a altas velocidades. • Mantenga el chorro del agua alejado de alambrados eléctricos, de lo contrario podrían ocurrir descargas eléctricas fatales.
CONOZCA SU MAQUINA SISTEMA DE LIMPIEZA Lea el manual del propietario y las reglas de seguridad antes de poner en marcha su sistema de limpieza. Compare las ilustraciones con su sistema de limpieza para familiarizarse con las ubicaciones de los diferentes controles y ajustes.
Conecte la manguera para productos químicos al La gran mayoría de su sistema de limpieza de presión acoplamiento de inyección de productos químicos de Craftsman ha sido ensamblado en la fábrica. Sin embargo, la bomba. usted deberá llevar a cabo los siguientes procedimientos...
Page 37
NOTA: Usted no puede necesitar utilizar todo el aceite suministrado. Vuelva a colocarla y ajústela en su posición. NOTA: Revise el aceite frecuentemente durante el despegue del motor. Agregue Gasolina ADVERTENCIA Montaje del Carretel de Manguera Conecte la carrete de la manguera a manubrio como La combustible y sus vapores son mostrado en la página 35 según hoja de instrucción incluyó...
Page 38
NUNCA utilice productos limpiadores para motores o Haga correr el agua a través de la manguera de su carburadores en el depósito de combustible, ya que podrían jardín por 30 segundos para limpiar cualquier escombro provocar daños permanentes. que se encuentre en ella. Desconecte el agua. IMPORTANTE: Hace NO agua de parar de siphon para el Conecte la Manguera y el Suministro de abastecimiento de agua.
OPERACION COMO USAR SU SISTEMA DE Para Poner en Marcha el Sistema de Limpieza LIMPIEZA Para darle arranque a su sistema de limpieza movido a Si tiene problemas con el funcionamiento de su máquina motor por primera vez, siga estas instrucciones paso a lavadora a presión, por favor llame a la línea de ayuda de la paso.
Page 40
10. Mueva el control de la válvula de admisión a la posición ADVERTENCIA "Rápido" ("Fast"), que se distingue con la figura de un conejo. Los motores al funcionar producen calor. La temperatura del silenciador y de las áreas cercanas puede alcanzar o pasar los 150°F (65°C). Quemaduras severas pueden ocurrir al hacer contacto.
Page 41
Cómo Usar las Puntas de Rociado Limpieza y Aplicación del Químico El conector rápido del prolongador de la boquilla admite IMPORTANTE: Utilice químicos diseñados varios tipos distintos de puntas de rociado. Cada punta de específicamente para máquinas lavadoras a presión. Los rociado proporciona un patrón de rociado diferente.
Page 42
Enjuage de la Máquina Lavadora a Cómo Usar el Carrete de la Manguera Presión La limpiadora a presión está equipada con un carretel de manguera diseñado para guardar la manguera cuando no Después de haber aplicado el detergente, refriegue la se utiliza la unidad.
INFORMACIÓN TÉCNICA SOBRE EL ESPECIFICACIONES DEL MOTOR PRODUCTO El motor es de uno cilindros, de válvulas en cabeza (OHV), Especificaciones de la Máquina Lavadora refrigerado por aire y de baja emisión. a Presión En el Estado de California, los motores de la serie 120000 Presión .
MANTENIMIENTO RESPONSABILIDADES DEL PROPIETARIO Siga el programa de mantenimiento según el número de horas o según el calendario, lo que suceda primero. Se requiere de servicio con mayor frecuencia cuando opere la unidad en las condiciones adversas descritas a continuación. CALENDARIO DE MANTENIMIENTO INTERVALO DE OPERACIÓN POR HORA ANOTE LAS FECHAS CONFORME...
Page 45
MANTENIMIENTO DE LA MAQUINA Revise el Filtro en Línea LAVADORA A PRESION Consulte la ilustración y suministre servicio al filtro en línea si se tapa siguiendo estos pasos: Limpie los Residuos Limpie a diario, o antes de cada uso, los residuos Filtro en línea acumulados en el lavadora a presión.
Page 46
MANTENIMIENTO DE LA BOMBA Mantenimiento de la Boquilla Si siente una sensación pulsante al momento de apretar el Cambio del aceite de la bomba gatillo de la pistola rociadora, puede que sea causada por la presión excesiva en la bomba. La causa principal de la Cambie el aceite cada 50 horas o una vez al año, lo que suceda antes.
Page 47
MANTENIMIENTO DEL MOTOR Incline su máquina lavadora a presión para drenar el aceite a través del orificio de llenado en un recipiente ADVERTENCIA adecuado asegurándose de inclinar la unidad hacia el lado opuesto de la bujía. Cuando la caja del cigüeñal esté...
Page 48
Remplace la Bujía • Retire la pantalla del apagachispas para limpieza e inspección. Remplace la bujía anualmente o cada 100 horas de operación. • Remplace la pantalla si está dañada. Limpie el área alrededor de la bujía y retírela. ADVERTENCIA Retire y revise la bujía.
ALMACENAMIENTO DESPUES DE CADA USO ALMACENAMIENTO PARA INVIERNO No deberá haber agua en la unidad por largos períodos de tiempo. Los sedimentos de minerales se pueden depositar en partes de la bomba y “congelar” su funcionamiento. Lleve PRECAUCIÓN a cabo estos procedimientos después de cada uso: Usted deberá...
Page 50
ALMACENAMIENTO PROLONGADO Aceite el Diámetro Interior del Cilindro • Retire la bujía. Rocíe aproximadamente 1 onza de aceite Si usted no planea usar la máquina lavadora a presión por limpio para motor dentro del cilindro. Cubra el orificio de más de 30 días, deberá preparar el motor para un la bujía con un trapo.
REPARACION DE DAÑOS Problema Causa Solución Está usando la punta de rociado de Cambie la punta de rociado a una de las baja presión (negra). tres punta de rociado de alta presión. La entrada de agua está bloqueada. Limpie la entrada. Suministro de agua inadecuado.
GARANTIA DEL SISTEMA DE CONTROL DE EMISIONES Sears, Roebuck and Co., U.S.A. (Sears), California Air Resources Board (Consejo de Recursos sobre el Aire de California, CARB, por sus siglas en inglés) y United States Environmental Protection Agency (Agencia de Protección Ambiental de EE.UU.
Page 53
Información Sobre el Período de Período de Cumplimiento de la Normativa Durabilidad de las Emisiones y el Índice de Emisiones en la Etiqueta de de Aire en la Etiqueta de Emisiones del Cumplimiento de Emisiones del Motor Motor Desde el 1 de julio de 2000, algunos motores Sears cuentan con la certificación de cumplimiento de la fase 2 de las Los motores con certificación de cumplimiento de la normas sobre emisiones de la United States Environmental...