Hitachi CP-X2520 Service Manual page 31

6-15 DIGITAL CONVERGENCE adjustment
Preparation
1. Open the ADVANCED MENU and select OPTION → SERVICE → GHOST, and then press the ► (right)
or the ENTER button to display the SERVICE_GHOST box.
2. While the RETURN is highlighted, operate the keypad or the remote control as follows. The DIGITAL
CONVERGENCE box will appear.
Keypad
Press the ▼ (down) button, and then hold the ▼ (down) button together with INPUT button for about
3seconds.
Remote control
Press the MAGNIFY OFF button, and then hold the MAGNIFY OFF button for about 3seconds.
3. Align the blue/red image with the green image using the HR, HB, VR and VB.
HR shifts the red image to the left/right.
HB shifts the blue image to the left/right.
VR shifts the red image upward/downward.
VB shifts the blue image upward/downward.
CP-X2520 ( M2-25ED ) / CP-X3020 ( M2-30ED )
31