Hitachi CP-X2520 Service Manual page 38

Wiring of MAIN board and INPUT board
(1) Attach Wire CNVID
Connect both ends of
the CNVID with a click.
Make sure to put the excessive
length of the CNVID.
Otherwise, the wire may touch
the optical unit when you attach
this block.
CNVID
Wiring diagram 7
15 to 30mm
Check the tape is not bended or the
#3 wire is close to any other wires.
Keep the #3 wire away from the
other.
y touch the optical unit when you
attach this block.