Basic Knowledge Required; Structure - Hitachi EC702MP-BB3 Operation Manual

4. Basic Knowledge Required

The mandatory knowledge and skills to operate the equipment are as follows:
• Knowledge of RF electronic circuits
• Knowledge of electricity and electrical systems
• Knowledge of digital electronics
• Experience conducting tests and Digital TV signal measurements in ATSC standards
• Knowledge of transmission antennas
• Experience operating radio frequency measurement equipment
• Practice in the management of radio frequency measuring equipment (spectrum Analyzer,
RF power meter, Vector Network Analyzer, couplers, attenuators, etc)

5. Structure

This manual is comprised of seven sections, which provide the following information:
Section 1 - Care, Warranty, and Service
This section indicates the necessary care with the equipment, warranty, criteria, and
technical assistance if needed.
Section 2 - Minimum Installation Requirements
This section comprises the minimum infrastructure requirements for installing these
devices, such as AC power, protection against lightning, and air conditioning.
Section 3 –E-Compact BB3 High Power Series UHF Digital TV Transmitter
This section presents all equipment characteristics, such as description, models,
functional description, and technical specifications of all the models of the E-Compact
series of High-Power Transmitters.
Section 4 - Installation
This section provides procedures for physical and electrical installation.
Section 5 - Initial Activation
This section describes which steps to perform in the initial activation of the equipment.
Section 6 – Preventive Maintenance
This section provides information for preventive maintenance.
Section 7 - Attachments
This section provides additional information for this document.
E-Compact MP-BB3 Series
9 | 108