Advertisement
Others
Troubleshooting
Problem
Power does not turn on
"FAN LOCKED" is
displayed on the
display window of this
unit
Power turns off
automatically
The power turns on
automatically
Input cannot be
switched
There are no video
images on the monitor
Screen is distorted
There is no audio
sound
Dubbing cannot be
performed
High-speed dubbing
cannot be performed
for EP mode titles
12
Symptom
The "HELLO" message remains displayed,
and the unit does not start up.
The cooling fan motor is not working.
The "AUTO POWER (OFF)" setting is set
to "2 HOURS" or "6 HOURS".
The temperature of this unit has rose, and
operation has ceased for safety purposes.
The "HDMI-CEC" setting is set to "ON".
i.LINK connection is currently being
established.
Monitor only supports RGB input.
"HDCP ERROR" is displayed.
Video images may be distorted during
reencoding/dubbing when the monitor (TV)
is connected to this unit using a HDMI
cable, or when the screen resolution is set
to "1080p".
Video images may be distorted during
reencoding/dubbing when the monitor (TV)
is connected to this unit using a HDMI
cable, or when the screen resolution is set
to "1080p".
The "HDMI AUDIO OUTPUT" setting is set
to "OFF".
The amplifier does not support
"BITSTREAM" output.
The title to be dubbed is copyright
protected.
A finalized disc has been inserted.
The disc is not formatted.
The SD card is write-protected.
Dubbing cannot be performed and "SOME
TITLES CANNOT BE DUBBED" is
displayed when trying to perform high-
speed dubbing of a EP mode title to a
DVD-VIDEO mode disc.
Action
Press the [RESET] button on the front panel.
If it does not start up, stop using this unit, unplug the
plug from the power point, and bring it to the dealer or
"Service Center".
The cooling fan motor is spoiled. Remove the power
plug from the power point, and consult the dealer from
which this product is purchased, or any nearby JVC
Servicing Center.
Change the "AUTO POWER (OFF)" setting of "SETUP"
to "OFF".
Place this unit in an area with ventilation if possible,
and wait approximately 30 minutes for it to cool down.
Change the "HDMI-CEC" setting of "CONNECTION" to
"OFF".
Cancel importing, or wait until the connection ends.
Set "HDMI --> DVI COLOR" in the setting menu to
"RGB FIX".
Use a monitor that supports HDCP.
This is not a malfunction. Change the "HDMI OUTPUT
RESOLUTION" to a value other than "1080p" (e.g.,
1080i) if you find it annoying.
This is not a malfunction. Change the "HDMI OUTPUT
RESOLUTION" to a value other than "1080p" (e.g.,
1080i) if you find it annoying.
Change the "HDMI AUDIO OUTPUT" setting of
"CONNECTION" to "ON".
Use an amplifier that supports bitstream output.
Titles that are copyright-protected cannot be dubbed.
Select a title that is not copyright-protected.
Insert a disc that has not been finalized.
Format the disc.
Remove the SD card and remove the write protect lock.
Set "HIGH-SPEED DUBBING" in the settings menu to
"4:3" before recording or importing in the EP mode.
Advertisement
