Advertisement
Problem
Data cannot be
imported
The title/group name
cannot be changed
The remote control unit
does not work
The disc cannot be
ejected
The disc cannot be
played
Output is at 480i
regardless of the
component output
resolution setting
The aspect ratios of
the HDMI output and
component output are
different
Mode Conversion
cannot be performed
although "SEAMLESS"
in the "MODE
CHANGE" menu is set
to "AFTER POWER
OFF" and the power is
turned off.
Symptom
The title to be dubbed is copyright
protected.
The number of titles stored in the HDD has
reached the maximum amount.
The remaining space on the HDD is
running out.
Protection of the title/group name is turned
on.
The battery of the remote control unit has
run out.
The remote control code of this unit and
the remote control unit are different from
each other.
A "LOCKED" message appears on the
display window of the unit.
A "LOCKED" message appears on the
display window of the unit.
The "READING" message does not
disappear from the unit's display window,
and the disc tray does not open when the
[ M ] button is pressed.
A disc that cannot be played on this unit is
inserted.
The region code of the BD or DVD is
different from that of this unit.
An unfinalized DVD disc that is recorded
using another device is inserted.
The component output setting may be
changed to 480i after viewing at a setting
of 1080/24p using a HDMI connection.
When two monitors are connected
respectively to the HDMI output and
component output terminals of this unit,
the screen aspect ratio of the component
output may not be appropriate if "VIDEO
PRIORITY MODE" is set to "HDMI".
Turning off the power may not start mode
conversion even if "AFTER POWER OFF"
in "SEAMLESS" is set and mode
conversion is interrupted by the power
being turned on while mode conversion is
in progress.
Action
Titles that are copyright-protected cannot be dubbed.
Select a title that is not copyright-protected.
Delete or combine the titles in the HDD to reduce the
amount of titles to less than 500.
Delete the titles in the HDD to increase the remaining
space.
Turn protection off for the title/group name.
Change new batteries for the remote control.
Change the "REMOTE CONTROL CODE" for the
remote control to the same number used by this unit.
Disable the "mode lock" setting.
Disable the "tray lock" setting.
Pressing the [ M ] button at the front of the unit for five
seconds or longer opens the disc tray. To close the disc
tray after removing the disc, press the [ A ] button,
and wait until the tray is closed and power is turned off.
(If the disc tray does not open after pressing the [ M ]
button for five seconds or longer, consult our authorized
dealer.)
Confirm that the disc is playable on this unit.
Confirm that the region number is playable on this unit.
Use that device to finalize the disc.
Turn the power off, and turn it on again.
When two monitors are connected simultaneously,
users are recommended to set "VIDEO PRIORITY
MODE" to "SDI/COMPONENT".
Cancel mode conversion.
Others
13
Advertisement
