Display Sequence Normal Mode - ABB F4HC Manual

3.3.5.1

Display Sequence Normal mode

Seq
Description
10 Accumulated energy. Heating (Default pos ition)
11 Accumulated volume. Heating
12 Accumulated energy. Cooling
13 Accumulated volume. Cooling
14 Display test, see fig.3.2
15 Error Code, see Error code
16 Accumulated Error Time, [Mi nutes]
17 Pulse counter 1
20 Momentary Power [H/C]
21 Momentary Flow
22 Supply Temperature (High)
23 Return Temperature (Low)
24 Temperature Difference [+/-]
1
30 Account days , [YYMMDD]
31 Account days, Accumulated energy Heating
32 Account days, Accumulated volume Heating
33 Account days, Accumulated volume Cooling
34 Account days, Accumulated volume pulse input 1, [m
35 Account days, Accumulated energy Cooling
36 Possible error code, at time of storage.
37 Possible accumulated error time , at the time of storage., [Mi nutes]
40 Monthly registers
41 Monthly registers, Accumulated energy Heating
42 Monthly registers, Accumulated volume Heating
43 Monthly registers, Accumulated volume Cooling
44 Monthly registers, Accumulated volume pulse input 1, [m
45 Monthly registers, Accumulated energy Cooling
46 Possible error code, at time of storage
47 Possible accumulated error time , at the time of storage, [Minutes]
50 Operating time, [Hours]
51 Relevant date, [YYMMDD]
52 Relevant time, [HHMM]
53 Recommended date for battery replacement, [YYMMDD]
60 Communication address, Primary address
A9 Communication address, Secondary address
b0 Meter S/N
63 Pulse value, converted to installed unit
64 Placing of flow sensor, [F/r], F = Supply, r = Return
70 Accumulated Error time, [Minutes]
71 Previous Error Code
72 Time for previous Error code, [Minutes]
Table 3.2, Display sequence 10 – 70, normal mode
2
, date when values are stored, [ YYMMDD]
3
]
3
]
4