Get Started - Motorola MOTONAV TN30 User Manual

get started

To get started, you need to turn on your MOTONAV TN30 and configure
initial device settings:
Press and hold the Power button to turn on the device until the display
1
becomes active.
After a few moments, a configuration wizard appears to provide step-by-step
setup instructions.
Set your language preference and tap OK.
2
3 Review Warning message and tap OK.
4 Review End User License Agreement (EULA), then tap the I Agree
checkbox and tap OK.
5 Set your time zone settings and tap OK.
Set your preferred measurement units and tap OK.
6
8
get started
If using your Bluetooth phone to make and receive handsfree calls from
7
your MOTONAV TN30, tap Yes button and follow these substeps to
connect to your phone. Otherwise, tap No and skip to step 8.
a Turn off any Bluetooth devices previously paired with your
MOTONAV TN30.
b Turn on the Bluetooth feature on your Bluetooth phone.
c Place phone in Bluetooth search mode.
Select MOTONAV TN30 from search results on your phone.
d
e Select OK or Yes to pair your MOTONAV TN30 with your phone.
f If prompted, enter 0000 for passkey. When your MOTONAV
TN30 successfully pairs and connects with your phone, you see a
confirmation message.
9